How To Set Up The Wii U

Download Article

Download Article

This wikiHow teaches y'all how to hook up your Wii console to your TV, equally well as how to get through the initial setup steps in one case your Wii is continued. The process for setting upward a Wii U is a bit unlike, so make sure you're using a Wii or a Wii mini and not the newer Wii U.

1. 1

   Place the Wii near your TV. Make sure that the Wii is placed close enough for the cables to attain the Goggle box and the power outlet.^[one]

   • If you are using the vertical stand, first make certain that the stand is assembled by taking the vertical stand and the circular piece of plastic and sliding them together until they click.

2. 2

   Connect your Wii to a power source. Plug the ability cable that came with your Wii into an electrical outlet, then plug the other terminate into the port on the far-left side of the back of the Wii.

   Advertisement

3. iii

   Attach the sensor bar to the Wii. Plug the thin, black-and-grey sensor bar's cable into the red port that's on the back of the Wii console, and then identify the sensor bar below and in front end of your Boob tube. Remove the covers over the viscous pads on the sensor'south bottom to secure it in place.

   • You lot can as well place the sensor bar on top of your Goggle box.

4. 4

   Connect the Wii to the TV. Most Wii units come with red, white, and yellowish A/5 cables; plug the non-colored stop of the cable into the flat, broad port on the back of the Wii unit of measurement, then attach the red, white, and yellow cables to the ruddy, white, and yellowish ports in the "Video In" department that's backside or on the side of your TV.

   • The Wii requires Wii-specific cables in order to connect to your Idiot box; standard A/V cables will not work.
   • If you're trying to connect your Wii'southward A/5 cables to a computer monitor, you'll take to purchase an adapter for your monitor.

5. five

   Insert batteries into the Wii remote. Remove the back panel from the Wiimote and put two AA batteries in. These are included with the console if you bought it new. Use the printed + and - guides to ensure that the batteries are inserted correctly.

   • If your Wii remote has a rubber jacket, y'all will need to remove information technology earlier you lot tin can access the battery cover.

6. vi

   Exam the Wii remote. Press A on the Wii remote to verify that the batteries are working. If you run across the lights at the bottom of the remote briefly turn on or flash and then stay on, your remote is working.

   • If the lights don't come up on at all, endeavour inserting new batteries.

7. 7

   Secure the wriststraps to the Wiimotes. Wriststraps are very important when using the Wii, especially when playing games with lots of motility. The Wii remote is secured at the lesser of the Wiimote past looping the wriststrap through the hook. You can cinch the wriststrap around your wrist while you play.

8. 8

   Turn on your TV. Press your TV'southward power button to plough on the gear up.

9. ix

   Switch to your Wii'due south input. Press your Tv set's (or Television remote's) Input or Video push button until you come across the right number appear. Your Wii will be plugged into the A/5 input, which is ordinarily input number 1, 2, or 3.

   • You tin double-bank check your Wii'south input number on your TV by looking for a number nigh the yellowish, white, and red plugs on the dorsum or side of your Boob tube.

10. 10

    Plough on the Wii. Press the Ability button on the front of the Wii. After a few seconds, you should see the Wii setup screen appear on your TV.

    • If you don't come across or hear anything, ensure that your TV is set up to the correct input, and that your A/V cablevision is connected correctly.
    • Cycling through the bachelor inputs volition eventually cause the Wii'due south setup screen to display.

11. 11

    Synchronize your Wii remote with your console. Once your remote is synchronized, you'll see one constant red light at the lesser of the remote, meaning that y'all can continue with setting upwardly your Wii. To sync your remote:^[2]

    • Open up the SD card slot on the front end of your Wii panel.
    • Remove the battery cover on the Wii remote.
    • Press the Sync button below the bombardment compartment.
    • Await for the lights at the lesser of the Wii remote to outset blinking.
    • Printing the red Sync push in the Wii's SD carte slot.

Advertisement

1. 1

   Printing the A push. Information technology'south at the top of the remote.

   • If your Wii has been ready up before, your Wii may open up to the home screen. If so, skip to the next part.

2. 2

   Select a language and printing A . This will select the language for your Wii's menus.

3. 3

   Select Continue and press A . Information technology'south in the bottom-correct corner of the screen.

4. 4

   Select a sensor bar position. Select either Above TV or Below Tv set and printing A, so select Proceed.

5. v

   Select a appointment. Select the upwardly or down arrows above or beneath the month, day, and year values, and then press A to change them. Select Continue when you're done.

6. 6

   Select a fourth dimension. You'll exercise this the same way that you changed the date. Select Continue when you're done.

   • Continue in listen that the clock here is in armed forces time, meaning that you add 12 to the time in PM from apex through midnight (eastward.thousand., 12:00 PM would be "1200", merely iii:00 PM would be "1500").

7. seven

   Select a widescreen setting. Select iv:3 for a normal TV or 16:9 for a widescreen Television set, so select Continue.

8. 8

   Enter a nickname for your console. Blazon in a name using the on-screen keyboard, and so select Continue.

9. nine

   Select a country. Select the country you're currently in and printing A, then select Proceed.

10. ten

    Select No and press A . This volition have you past the parental controls alert.

11. eleven

    Press A . This will acknowledge that you lot have read the Wii'south burn-in reduction filter policy. Doing and so will take y'all to the Wii home screen, signifying that your setup is complete.

    • Depending on your Wii, a video displaying how to use your Wii may begin playing.

Advertisement

1. 1

   Select Wii and press A . This option is in the lesser-left corner of the screen. Doing so prompts a pop-upwardly card.

2. 2

   Select Wii Options and press A . It'southward an choice in the pop-up menu. This will open the Wii Options page.

3. 3

   Roll right, and so select Sensor Bar and press A . Scrolling right takes you to the second page of the Wii Options screen, and the Sensor Bar selection opens your Wii's sensor bar settings.

4. 4

   Select Position and press A . Doing so opens the Position carte.

   • Skip this pace if y'all don't want to reset the position you lot prepare during the Wii setup.

5. 5

   Select a position. Select either Above TV or Below TV and press A.

6. half dozen

   Select Confirm and press A . It's at the bottom of the screen. This volition fine-melody your sensor based on its position.

7. vii

   Accommodate your sensor bar's sensitivity. Select Sensitivity and press A, and so press + or - on your remote to increment or decrease your remote's sensitivity on-screen.

8. viii

   Press A . This volition confirm your decision and render you to the Sensor Bar page.

Advertisement

1. 1

   Leave the Sensor Bar folio. Select Back and press A to return to page two of the Options page.

   • If you take an Ethernet USB adapter that y'all bought from Nintendo, yous can plug it into the back of your console and then plug an Ethernet cable from your router into the adapter.

2. two

   Select Internet and press A . This will open the Internet settings.

3. 3

   Select Connexion Settings and printing A . This will brandish a listing of iii connections.

   • If the Wii has never been connected to the internet, all of the settings will say "None" next to the Connection number.

4. 4

   Select an unused connection and press A .

5. five

   Select Wireless and printing A . Doing so will take you to the wireless network folio.

   • If you lot're using Ethernet, select Wired and then select OK to connect to the Internet.

6. 6

   Select Search for an Access Point and press A . This will bring up a listing of the current available networks.

7. 7

   Select a network and press A . This volition bring up the connectedness'southward page.

   • If the connexion is public, selecting the network will prompt your Wii to connect to it automatically.

8. 8

   Enter your network'south countersign. If your network is password-protected, enter the password and press A.

9. 9

   Update your Wii. Once you connect to either your wired or wireless network, y'all volition be prompted to update your arrangement. These updates can improve system functionality, and are required if you are playing online.

   • Do not update your system if information technology is modded, or it will be bricked and you volition lose access to your Homebrew aqueduct.

10. x

    Add games and channels. After updating your system, you will exist connected to the internet every time the Wii is turned on. You can and so add games and channels from the Wii store. Games will cost money to purchase, simply nigh channels tin can be downloaded for free (some require a separate subscription to employ).

    • You can admission the store from the Wii Channels screen.

Advertising

1. 1

   Insert the game you want to play. If there's nothing in your disc slot, you can insert the game into the disc bulldoze to load it. Inserting the disc volition open the game'southward channel, allowing you to get-go it by pressing the button on your screen.

   • Make sure that you insert the disc the correct direction, with the characterization facing up.
   • You tin can also download games from the Wii store and they will show upwardly as channels in your Channel menu.

2. ii

   Utilize the Wiimote to play. Depending on the game, you may be asked to swing your controller around to play the game. Make certain y'all accept plenty of room to move, and that you won't bump into anyone or anything.

3. 3

   Play a GameCube game . If you want to play a GameCube game in an RVL-001 Wii, you will need to use a GameCube controller, and plug information technology into one of the ports on the top (vertical) or left side (horizontal) of the Wii. You lot will demand to open a flap to admission the ports.

   • Yous'll insert the GameCube game like you lot would a regular Wii game. Although the discs are smaller, they tin can be inserted into any function of the disc loader.

Advertisement

Add together New Question

• Question

  What do I do if there is no sensor, and the cursor doesn't piece of work?

  

  If there is no sensor bar, the cursor will not piece of work. You need to gear up your sensor bar.

• Question

  How do I connect a Wii Board to my Wii?

  

  The Wii balance board connects just like a Wii remote. Insert its batteries, press the power push button on the board, and it should connect as Wii remote 4. The start time you lot connect it, you may demand to hold the modest red reset buttons (one in the board's battery compartment, the other behind the Wii's SD card slot cover) simultaneously.

• Question

  How do I download the Wii Mii channel to play games?

  

  The Mii channel comes preloaded on every Wii. It is non used to play games; it is simply where y'all create characters, "miis" that tin exist used in many games.

• Question

  I don't see a yellow plug-in for the Wii cables on the back of my TV. Whatever suggestions?

  

  The bank of plug-ins may be hidden backside a trap door on the back of your TV.

• Question

  How exercise I search for a game in the Wii Shop?

  

  Abbey M.

  Community Reply

  Go to the Wii Shop Channel, then yous select Start Shopping, so Virtual Console for older games or WiiWare for newer, more advanced gameplay experiences. Browse with a filter of your choice.

• Question

  When I apply names and faces to the people in the games, does that stay on the deejay or in the Wii unit?

  

  Information technology depends on what people y'all are using. If "people" are mii's (created in Mii aqueduct) they will stay in the console. If they are created inside a game, they will stay in that game where they been created.

• Question

  How do you lot connect peripherals to a Wii?

  

  Peripherals such as keyboards can be continued using the two USB ports on the back of the console. GameCube controllers tin exist plugged into the ports on top of the Wii.

• Question

  What do I practice if my system says information technology can't read the disc?

  

  Check the deejay for clay. If it is dirty, make clean the disk with a dry soft cloth. If the game is scratched, try replacing the game. If you withal cannot get the Wii to play the game, become to a local video game store and ask if they can clean the laser lens for you lot. If all else fails, contact Nintendo for repairs.

• Question

  How can I go on the hand cursor from disappearing?

  

  Brand sure your sensor bar is in an unobstructed location -- either direct above or below your TV. Betoken the Wii remote at the screen at an optimal altitude (3 to 10 feet from the TV).

• Question

  Why, when I endeavour to admission the game, does it tell me to add together movement sensor plus to my paw set, and why won't it permit me bypass that folio in setup?

  

  Abbey M.

  Community Respond

  Your game requires Wii MotionPlus, a separate accessory for older Wii Remotes. Newer remotes have this characteristic congenital-in. You can tell by the text on new Wii Remotes nether the LEDs reading "Wii MotionPlus Inside." You will not be able to play that game without Wii MotionPlus.

Show more than answers

Ask a Question

200 characters left

Include your email accost to get a message when this question is answered.

Submit

Advertisement

Video

• Ensure the Sensor strip is in the best identify when you are playing. Test it out and motion it if you recollect it isn't accurate enough.

Advert

• This system tin can easily break if knocked off or dropped.

• Don't have the controller likewise close to the sensor bar! Information technology can make the cursor flicker or move.

• Be sure that when placing the panel vertically, it won't autumn over. The concluding thing you want to do with your new Wii is to take your cat knock it over! Y'all may desire to identify it on its side.

• Brand sure that strap is firmly connected to the remote and deeply fastened to your wrist before playing!

Advertisement

About This Article

Article Summary 10

To set up your Nintendo Wii hardware, plug in your Wii and then connect the sensor bars to your TV. To do this, plug the thin, black-and-grey sensor bar's cable into the red port that'south on the back of the Wii console. And so, place 1 sensor bar above or on your Idiot box and the other below your TV. After your sensors are continued, attach the crimson, white, and yellowish A/V cables to the colored ports behind or on the side of your Telly. So, turn on your Television receiver, discover the input channel and follow the directions on the ready carte du jour. To learn how to ready up your Nintendo Wii software, scroll downwardly!

Did this summary assist y'all?

Thanks to all authors for creating a page that has been read 531,258 times.

Did this article assistance you?

Source: https://www.wikihow.com/Set-Up-Your-Nintendo-Wii

Share this post