How To Set Inform Unifi Ap

Unifi Admission points are great devices, near of the time when yous connect a new Access Point they will observe the controller within a infinitesimal. But what if your new access point isn't showing up in your controller?

When the status led of your new access signal is steady white (or steady amber for older admission points) then information technology's waiting for adoption. Only sometimes the device won't show upwards in the controller.

In this commodity, I will explicate how you can use the Set-Inform command on an Unifi Access Betoken.

Employ Set-Inform on Unifi Access Point

The Set-Inform URL tells the Unifi Access Point where the controller is located. By default, the access point will search the network for the controller, using the default DNS proper noun unifi. This doesn't e'er work, then we need to tell the admission signal the correct address of the Unifi Controller.

To set the inform URL we need to connect over SSH to the Unifi access point. You don't need an SSH client for this, we can simply utilise PowerShell for this, which is installed by default on all Windows 10 and xi computers.

The default SSH username and password are ubnt. If yous accept changed it, then y'all can look it upwardly in the controller under System > Application Configuration > Device SSH Authentication.

Notation

The default inform url is http://unifi:8080/inform. Unifi is the internal DNS name of your Unifi Controller. This doesn't e'er work, better is to use the IP Address of the controller, for instance: http://192.168.i.one:8080/inform

We too need to know the IP Accost of the access point. Yous can apply the Ubiquiti Discovery Tool for this or Advanced Ip Scanner.

1. Open PowerShell

   We showtime need to connect the access point over SSH. To practice this nosotros are going to use PowerShell.

   one. Press Windows key + X (or right-click your start menu)
   2. Choose Windows PowerShell

2. Connect SSH

   Type ssh [email protected] (replace 192.168.ane.142 with the IP Address of your access betoken)

   Enter the default password ubnt (or lookup the SSH details in your controller)

   
3. Gear up-Inform URL

   The inform URL is the IP Address of your controller followed by the port number: 8080/inform.

   And so if the IP Accost of your controller is 192.168.1.one, then the inform URL is :
   http://192.168.ane.i:8080/inform

   Type the following control and printing enter:
   gear up-inform http://192.168.1.one:8080/inform

   
4. Complete the adoption in the controller

   Yous should now see the access point in the controller, set for adoption.

   

If the access indicate even so doesn't prove up in the controller, and then check if the settings are applied correctly. Type info and printing enter to encounter the status of the access point:

UAP-Air conditioning-Lite-BZ.5.43.36# info  Model:       UAP-Air-conditioning-Lite Version:     5.43.36.12724 MAC Address: f0:9f:c2:f6:d1:fd IP Address:  192.168.ane.142 Hostname:    UAP-Ac-Calorie-free Uptime:      633 seconds  Status:      Not Adopted (http://192.168.one.1:8080/inform) UAP-Air-conditioning-Calorie-free-BZ.five.43.36#

Every bit you tin can see in the results higher up, the inform URL is ready correctly, only the device is still waiting for adoption.

Wrapping Up

If you lot are nevertheless unable the adopt the Access Indicate, then follow this article where we are going to solve the adoption failed error.

If you accept any questions, just drop a comment below.

Related Posts

Source: https://lazyadmin.nl/home-network/unifi-set-inform/

Share this post